Fully Automatic Back-flushing Filter (ABW Series)
The ABW series is a fully automatic self-cleaning back-flushing filter for high-viscosity, solids-laden liquids. Filtration continues without interruption even during back-flushing — no cartridge replacement, no operator attendance — a low-consumable, low-labor solution for water treatment, steel, mining, paper-making and petrochemical plants.
Key Features
- Zero consumables — no filter cartridge to replace, an environment-friendly design
- Fully automatic, unattended operation — minimal labor cost
- Continuous filtration with no interruption during back-flushing
- Compact body, large flow capacity — high efficiency and cost-saving
- Handles high-viscosity liquids up to 800,000 mPa·s with impurity content below 1,000 ppm
- Wide precision range of 50–2,000 µm
- housing in SS304, SS316L or carbon steel
- PTFE scraper on an SS316L piston rod keeps the element surface clean
- Only requires a 220 V AC control supply and 0.4–0.6 MPa clean, dry compressed air
Specifications
| Model | ABW300 ~ ABW1200 |
|---|---|
| Drain outlet | DN40 |
| Filtration precision | 50–2,000 µm |
| Design temperature | 0–200 °C (depending on seal material) |
| Inlet & outlet | Flanged |
| Filter element | MS / NS / AS |
| Housing material | SS304 / SS316L / carbon steel (CS) |
| Piston rod material | SS316L |
| Scraper material | PTFE |
| Housing seal | NBR / EPDM / Viton |
| Filter element seal | NBR / EPDM / Viton |
| Blow-down valve | Full-bore pneumatic ball valve (single- or double-function), SS304 / SS316L |
| Utilities | 220 V AC |
Applications
- Industries: water and wastewater treatment, steel and iron, pulp and paper, mining, petrochemical
- Liquids: groundwater, seawater, lake / reservoir / pool water, circulating cooling water,
- chilled water, high- and low-pressure spray water, heat-exchanger circuits, sealing water,
- bearing cooling water, oilfield injection water, process circulating water, machining coolant,
- cleaning agents and wash water
Overview
The ABW is an electromechanical integrated back-flushing filter with a rational design, high filtering efficiency and low operating cost. Its defining feature is that filtration carries on continuously — even while the unit is back-flushing itself — so downstream production never waits for a filter to be cleaned or swapped.
How it works
Liquid passes through the filter element, and retained impurities are swept off the element surface by a PTFE scraper mounted on an SS316L piston rod. When the differential pressure across the element reaches the cleaning setpoint (50–100 kPa, depending on liquid viscosity — monitored by a pressure / differential-pressure transmitter), the unit runs a back-flushing cycle and discharges the flushed solids through a full-bore pneumatic ball valve, without interrupting the main flow.
Key advantages
- No filter cartridge replacement — zero consumable cost, environment-friendly
- Fully automatic operation — no dedicated operator required, reduced labor cost
- Highly effective, continuous operation — no interruption during back-flushing
- Small size, large flow, high speed, high efficiency and cost-saving
Typical duties
Widely used in metallurgy, chemical processing, power generation, oilfield reinjection water, ballast water and environmental water treatment. Suitable liquids range from groundwater, seawater and surface water to circulating cooling water, chilled water, spray and heat-exchanger circuits, bearing cooling water, oilfield injection water, process circulating water, machining coolant and cleaning agents.
Utilities & installation notes
The control system requires a 220 V AC supply; the pneumatic actuation requires clean, dry compressed air at 0.4–0.6 MPa. Inlet and outlet are flanged; the drain outlet is DN40. Housing materials and elastomer seals (NBR / EPDM / Viton) are selected according to the liquid and the operating temperature, up to 200 °C.